Paver Patio Cost in Overland Park, KS (2026 Pricing Guide)
Finished paver patio installed in Overland Park, KS
If you are planning a paver patio in Overland Park, the first question is almost always the same: what is it going to cost? This guide breaks down real pricing, what drives it up or down, and how to get the most value for your money.
Average paver patio cost by size
Here is what homeowners in Overland Park typically invest, based on the finished size of the project:
| Project size | Typical installed cost |
|---|---|
| Small patio (around 300 sq ft) | $7,500 - $10,500 |
| Medium patio (around 500 sq ft) | $12,500 - $17,500 |
| Large patio or walkway (around 800 sq ft) | $20,000 - $28,000 |
Walkways and paths are priced by the same square-foot range, so a smaller walkway will fall below these figures while a large patio with custom features will land toward the higher end.
What is included in the price
A quality paver installation is far more than the pavers themselves. Your price covers design and layout, excavation and grading, the compacted gravel and sand base, the pavers, installation labor, edge restraints, and joint sand. Sealing is often an optional add-on. The base preparation is the part you never see, and it is the most important part of the job, it is what keeps your patio from sinking or shifting over time.
What affects your paver patio cost
Two patios of the same size can carry very different price tags. These are the factors that move the number:
- Size. Larger projects cost more overall but often less per square foot.
- Paver type. Standard concrete pavers are the most affordable option, while premium and natural stone pavers cost more.
- Site preparation. Johnson County clay soil, slopes, and drainage issues can add to the base work.
- Patterns and borders. Herringbone layouts, banding, and custom borders add labor.
- Add-ons. Fire pits, seat walls, steps, and lighting raise the total.
- Access. Tight backyard access means more hand-hauling and labor.
Are pavers worth it compared to concrete?
Pavers cost more upfront than a poured concrete slab, but they last longer, they do not crack the way slabs do in our freeze-thaw winters, and any damaged paver can be replaced individually instead of tearing out the entire patio. They also add more resale value and curb appeal. For most Overland Park homeowners, that is why pavers win over the long run.
How to get the best value
- Insist on proper base preparation. A cut-rate base is the number one reason patios sink within a few years.
- Seal your pavers to protect against stains, fading, and weed growth.
- Get a written scope and price before any work begins.
- Hire a local, insured team that stands behind its work.
Paver patio cost FAQ
How much does a paver patio cost in Overland Park?
Most run $25 to $35 per square foot installed, or roughly $7,500 to $10,500 for a typical 300-square-foot patio.
Are pavers cheaper than concrete?
No. Pavers cost more upfront, but they last longer and will not crack like poured concrete, so they often cost less over the life of the patio.
How long do paver patios last?
With proper installation and occasional sealing, a paver patio can last 25 years or more.
Do paver patios add home value?
Yes. Quality hardscaping and usable outdoor living space are among the higher-return exterior upgrades.
Do I need to seal my pavers?
Sealing is not required, but it protects against stains and fading and keeps weeds out of the joints. We recommend resealing every two to three years.
Get a free paver patio quote in Overland Park
Ready for a number on your specific project? We design and install paver patios and walkways across Overland Park and Johnson County, and we also restore and seal existing ones. Call (913) 912-0433 for a clear, written price with no pressure.
Request a Free Quote